1 Smart VibroAnalyzer 95 measuring unit
with integral rechargeable battery and user dialogue in German, English, French, Spanish, Italian, Russian, Hungarian, Romanian, Polish, Czech, Thai, Chinese

1 acceleration sensor kit with:

• 1 AS-053 Single Axis Acceleration Sensor
• 1 magnet for flat and curved surfaces
• 1 connection cable, 5 m long

1 USB-C connection cable to the PC, 1.5 m long
1 combined power supply unit/charger with adapters
1 screen protector
1 hard shell case for measuring unit and accessories

Included modules:

• Diagnostic
  This module is an expert system for automatic detection of possible machine faults. It enables you to automatically detect machine faults such as unbalance, looseness, misalignment and bearing faults.
• Analyzer
  With the Analyzer Module, the user can select the type of measurement (from simple overall values to FFT’s and time signals, to more advanced measurements such as orbits using displacement / proximity probes) and set up multiple, synchronized, simultaneous measurements from all channels with settings such as frequency range, sampling rates and units.
  • Real-time FFT
  • Demod/envelope analysis
  • ACMT – low speed bearing analysis
  • Orbit Measurement
  • User Band Pass Analysis
  • FFT Resolution: Min: 100 lines, Max: 3,276,800 Lines
  • Fully simultaneous for 4 channels
  • Crest Readings
    Time signal measurements
  • Phase Shift
  • DC Measurements
  • Centerline Measurements
  • Smax
  • Overall Measurements
• Balancer
  This module allows for balancing equipment in situ, both in the field and during final assembly, providing a quality product.
  • Multiple balancing types such as Polar (0-360 degrees), component and fixed weights
  • Flexible Visualization of balancing: polar plot and table overview
  • Optimizing the final vibration level at the two bearings supports in an early stage while
    balancing in a single plane
  • Allows for Rotor setting to calculate balance quality according to ISO 1940
• Advanced Balancer
  With the advanced balancing module, balancing of flexible and rigid rotors in up to eight (8) planes is possible. Multi-plane is used for rotors with complex geometries that exhibit significant unbalance in multiple planes. In addition, the Advanced Balancer Module can assist with complicated jobs where the number of measurement points is larger than the number of correction planes available.
• Ultrasound-Recorder
  This module uses a microphone (sold separately) to enable the measurement of sound that is inaudible to the human ear. Typical applications that benefit from the use of ultrasonic measurements are the detection of air leaks, electrical arcs or the early detection of bearing faults.
• Bump Test
  The bump test determines the natural frequencies of a machine system. In the context of a rotating machine, this pertains to those ranges of rotational speeds within which vibrations are disproportionately amplified due to resonances, posing the potential to damage the machine (Smart VibroAnalyzer 95 only).
• Lubrication Greasing Control
  This module can be used to monitor and control bearing lubrication processes. Both a lack or excess of lubricant is harmful to a rolling element bearing. This module measures the actual bearing lubrication status and informs the operator when the lubrication state is optimal, relative to programmed lubrication guidelines.
• Stethoscope
  This module is designed for listening to vibrations. These can also be recorded and played back.
• Oktave Analysis
  With the Octave Analysis Module, you can measure audible sounds by connecting a microphone to the Smart VibroAnalyzer 95. Measure sound levels and octave spectrums with selectable resolutions of 1/1, 1/3, 1/12, or 1/24
• Camera
  The camera module allows you to "record" the raw signal from the sensor, i.e. the raw signal from the machine. The module is equipped with an optical camera that allows the SVA 95 user to take pictures of the machine.

Additional Accessories that can be added:

• Acceleration sensor kits
• Triaxial Acceleration sensor
• Thermal imaging Camera
• Microphone
• Laser Reference kit
• Additional Modules that can be added:
  • Tracking
  • Data Collection